Chip:CC2652R
Frequency:Zigbee3.0+BLE5.0
TX Power:+5dBm
Antenna:PCB
Distance:500m
Dimension:23.5*17mm
Feature:Zigbee3.0+BLE5.0
Product introduction:RC2652A is based on Texas Instruments CC2652R is the core of simplelink multi protocol 2.4 GHz wireless module. In addition to integrating a high-performance ARM Cortex-M4F processor for application logic and an arm Cortex-M0 processor for RF core, the module also has a very unique 16 bit low-power sensor processing core.
RC2652A is based on Texas Instruments CC2652R is the core of simplelink multi protocol 2.4 GHz wireless module. In addition to integrating a high-performance ARM Cortex-M4F processor for application logic and an arm Cortex-M0 processor for RF core, the module also has a very unique 16 bit low-power sensor processing core.


| 引脚序号 | 名称 | 功能 | 备注 |
| 1 | P00 | GPIO | GPIO, Sensor Controller |
| 2 | P01 | GPIO | GPIO, Sensor Controller |
| 3 | P02 | GPIO | GPIO, Sensor Controller |
| 4 | P03 | GPIO | GPIO, Sensor Controller |
| 5 | P04 | GPIO | GPIO, Sensor Controller |
| 6 | P05 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 7 | P06 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 8 | P07 | GPIO | GPIO, Sensor Controller, high-drive capability |
| 9 | P08 | GPIO | GPIO |
| 10 | P09 | GPIO | GPIO |
| 11 | P10 | GPIO | GPIO |
| 12 | P11 | GPIO | GPIO |
| 13 | P12 | GPIO | GPIO |
| 14 | P13 | GPIO | GPIO |
| 15 | P14 | GPIO | GPIO |
| 16 | P15 | GPIO | GPIO |
| 17 | JTAG_TMSC | JTAG_TMSC | JTAG TMSC, high-drive capability |
| 18 | JTAG_TCKC | JTAG_TCKC | JTAG TCKC |
| 19 | P16 | GPIO | GPIO, JTAG_TDO, high-drive capability |
| 20 | P17 | GPIO | GPIO, JTAG_TDI, high-drive capability |
| 21 | P18 | GPIO | GPIO |
| 22 | P19 | GPIO | GPIO |
| 23 | P20 | GPIO | GPIO |
| 24 | P21 | GPIO | GPIO |
| 25 | P22 | GPIO | GPIO |
| 26 | P23 | GPIO | GPIO, Sensor Controller, Analog |
| 27 | P24 | GPIO | GPIO, Sensor Controller, Analog |
| 28 | P25 | GPIO | GPIO, Sensor Controller, Analog |
| 29 | P26 | GPIO | GPIO, Sensor Controller, Analog |
| 30 | P27 | GPIO | GPIO, Sensor Controller, Analog |
| 31 | P28 | GPIO | GPIO, Sensor Controller, Analog |
| 32 | P29 | GPIO | GPIO, Sensor Controller, Analog |
| 33 | P30 | GPIO | GPIO, Sensor Controller, Analog |
| 34 | VCC | Power Supply | 1.8 V ~ 3.8 V,Recommend 3.3 V |
| 35 | GND | / | |
| 36 | RESET | RST,Active low. No internal pull-up |